Chronics

If you ask your operators to program the range limiting device, will they be able to do it without a problem?

This is the question that a CNESST inspector will ask you during his next visit to your site. If the answer is negative, you will have to suspend your activities until your operators have undergone adequate training.

Make sure your operators know how the range limiting device works to avoid unnecessary stops during the working season. Trainings are available. Contact your distributor. Don't wait for the CNESST to come to your construction sites!

Amendment to the Safety Code for Construction works

The CNESST recently made an amendment to the Safety Code for Construction Work (decree 483-2021). This amendment addresses the regulations for electricity, scaffolding, working near a power line, and portable tools.

In this document we learn that operators now have an obligation to receive training on the operation of the range limiting device.

To consult the modification sheet: 

French only 

New decree :

(Decret 483-2021, Gouvernement du Québec)

5.2.2 An employer who proposes to perform work for which a part, load, scaffolding, piece of machinery or person is likely to approach a power line within the minimum approach distance specified at Article 5.2.1 may carry out this work if it meets all the conditions set out in one of the following paragraphs:

˂…˃

ii. the operator of the deployable construction equipment, equipped with a device referred to in paragraph 1, must have received training from the manufacturer to properly use this device.

To consult the complete decree:

French only 

The Alltech Group - The strength of a network!

Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service! 

Semi-Synthetic grease lithium complex 

Groupe Alltech EP-1.5 Semi-synthetic grease is a general-purpose grease formulated specifically to meet the requirements for moderate to heavy loads. .

The select additives used in this unique formulation (Extreme Pressure, Anti-Wear, and Rust & Oxidation) ensure that this grease will perform exceptionally well in the most demanding applications and extend component and equipment life.

Download brochure:

Characteristics:

• Water resistant
• Slow melting
• Resistant to heavy loads
• Rust and oxidation resistant
• Reduces wear
• Will not separate at high RPM
• Fortified with extreme pressure additives for high load capacity
• Stability over a wide range of pressures and temperatures
• Format: Barrel 55kg Cartridge 400gr (1 box: 10 cartridges)

Typical applications :

• Holes and pipe connections
• Flanged connections
• High temperature rings
• Rings lubricated for life
• Heavily loaded slow bearings
• Steam valve stem lubrication

Download MSDS:

“H.P.C. Hydraulique Inc.” has been part of the Alltech Group family for 4 years.

It was in September 2017 that HPC made the choice to diversify its products by adding in particular those distributed by the Alltech Group.

Their priority is customer satisfaction. They provide professional service and quality products. Choose H.P.C. Hydraulique Inc. is about getting peace of mind; you trust experienced technician for your equipment.

H.P.C. Hydraulique Inc. distributes all the products offered by the Alltech Group, namely:

• Allfett- Automatic greasing system
• Mega – Range limiting device
• Pfreundt – Weighing system
• NBS-Cam – Backup camera and pedestrian detection
• Blaxtair - Pedestrian detection system
• Laserline – Laser guidance
• OKO – Tire sealant
• Sentinel – Dump up sensor  

Services & Expertise 

Their motto: OUR PRIORITY: SERVICE!

H.P.C. Hydraulique Inc. is proud to supply various industries with hydraulic components and machining of all kinds. Based in Sept-Iles, QC, they are proud to offer fast, personalized and quality manufacturing.

H.P.C. Hydraulique Inc. offers you a complete list of adapted services:

• Supply of hydraulic components
• Repair of hydraulic components
• Refurbishment of hydraulic cylinders
• Refurbishment of hydraulic pumps
• Machining of all kinds
• Mobile mechanic service

For more information or to request a quote: 

H.P.C. Hydraulique Inc.

294 Avenue Noel,

Sept-Îles, QC

G4R 5J2

Phone: (418) 968-5411

Email : david@hpchydraulique.com

Alltech Group – The strength of a network!

Our after sales service is our strength. Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company. 

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!

Find a distributor 

Prevention is better than cure - Be more productive on the road 

For HGV fleet owners and the commercial tire specialists that supply them, an effective truck puncture prevention and tire life extension system has become essential. No-one can afford to miss a just-in-time delivery: downtime prevents successful operation.

Likewise, bus and coach operators know just how disruptive and expensive it is to have a vehicle stopped with a puncture. Recovery is time-consuming and ruins the whole day’s schedule.

OKO Truck & Bus tire sealant for Heavy Goods Vehicles is the solution

A tire sealant sealant designed to deal with ON Road speeds in the tires of heavy trucks, trailers ans buses. Prevents punctures of up to 8mm diameter and stops tire deflation as you drive; seals a hole in the tread area the moment the puncture happens

Copes with the friction and heat inside fast-moving tire: reduces the temperature and lessens the loss of air. In a matched 5-month European test, the OKO Truck & Bus equipped truck had 20% less tire wear than the non-OKO truck. On the steer tires, the difference was 40%.

Lasts 100 000 - 140 000 km (60 000 - 90 000 miles) before more Truck & Bus should be injected (If the tire is still usable) to maintain a liquid layer: the longer duration can be expected in cool climates. Only a small amount is used in making each seal. Truck & bus remains liquid inside the tire even after multiple sealing events. For tubeless pneumatic tire: inner tubes are too weak inside fast road-going vehicles and cannot be sealed reliably.

Download the technical datasheet

Protect your vehicles, your drivers and your passengers: fit OKO Truck & Bus.

Application Fields: 

• Bulk hauliers
• Logistics companies
• Fleet Managers
• Bus & Coach garages
• Tire management companies
• Tire accessories wholesalers

Equipments 

• Heavy Trucks 
• Lorries, Tankers and Freight Vehicles
• Trailers / Semi-Trailers
• Buses
• Coaches
• Refuse & Skip Haulage Trucks
• on-road vehicles over 5 tonnes 

Get a quote