OVERVIEW
The GL1700 Laser Guide was designed from the ground up to provide precise start-stop location control for walk behind paint striping equipment. It can also be use to establish the height of the load on the forks of the carriage. It acts as a guide under the forks. The laser is fixed on the fork to point under the carriage.
- OSHA Compliant
- Compact and Durable
- Faster
- More Precise
- Easy to Use!
FEATURES
ELECTRONIC FEATURES
- Automatic Power Control (APC) keeps laser power stabilized through ambient temperature changes.
- Over temperature protection circuit with automatic soft shutdown to protect electronics and laser module from overheating.
- Reverse polarity protection; protects the GL1700 in case the power leads are connected backwards.
- Input power stabilization-protects against power spikes.
- Universal voltage input-automatically operates GL1700 on 12 volts DC (11-25 volts DC) Ultra-low power consumption: 0.1 of 1 amp at 12 vdc / 0.05 amp at 24vdc
SPECIFICATIONS
Laser
- Laser Wavelength 510-532nm
- < 2mrad
- Laser Power: 4.75mW
- This laser product qualifies as ‘Class IIIa’ in the U.S. under US FDA/CDRH 21 CFR, part I, Subchapter J, sections 1040.10 and 1040.11
- This product qualifies internationally (outside the US) as ‘Class 3R’ under: -‘EN/IEC 60825-1 2014 edition 3’ (E.U.), -‘BS EN 60825-1:2014’ (UK) -‘AS/NZS 60825-1:2011’ (Australia/New Zealand) -& other countries, including: Japan, Korea, China, Singapore, Israel, South Africa, and more.
- U.S.A OSHA compliant: Meets all Federal and International standards
- Calculated Operating Life: 15,000 hrs. MTBF
Environment
- Operating Temperature: -40°F to 122°F (-40° to 50°C)
- Enclosure Rating: Outdoor dust and water rated to IP65
- Vibration compliant per MIL-STD-810F method 5145 and truck assurance level 2, schedule E
Electronic
- Power Source: 12 or 24 volt DC (11-25 volts DC)
- Power Draw: 0.1 of 1 amp at 12vdc/ 0.05 amp at 24vdc
- Reverse Polarity and Spike Protected
- Over Temperature Protection Circuit
- Automatic Power Control: (APC) Keeps laser power stabilized through ambient temperature changes
Mechanical
- Aluminum housing with clear hard coat anodize
- UV stabilized glass filled lexan end caps
- Universal clamp with built-in adjustments for aiming laser
- Heavy duty 7 foot power cord
- Replaceable paint overspray optics shield
- Laser Dimensions: 3 ½” length x 2.0”width x 1” height
- Laser and Mount: 3 ½” length x 3.0”width x 3 ¾” height
- Weight: 1 lb.