Increase the productivity of your equipment,

while ensuring the safety of your employees.

Our systems can be installed on all types of machines;

Utilities truck, Service truck, Tank truck,

Recycling Truck, Delivery Truck, Crane truck, Garbage Truck

Asphalt truck, Cement Truck, Dump Truck

Offered solutions

Automatic lubrication

The ALLFETT greasing system protects your equipment; it insures a continuous greasing to the points at regular intervals.

Shortage of grease, heavy loads, dust and water prematurely wears out your moving parts of the machine.

Example of installation on a dump truck

Example of installation on a Vacuum truck

Example of installation on a dump truck

Learn more about lubrication systems:

Laser Guidance

The laser guidance uses an ultra high visibility green laser to establish visual line control.

Versatile all weather product that can be used for any vehicle or equipment requiring line control.

Dump up sensor

Designed to help the driver be more vigilant.

Sends a visual signal (flashing light) and an alarm when the truck is functioning and the dump is raised.

RTG Tire sealant

Speed-rated puncture protection treatment

Can seal multiple punctures as you drive, thus allowing commercial tires to remain operational for longer.

Increase the productivity of your equipment,

while ensuring the safety of your employees.

Our systems can be installed on all types of machines;

Road reclaimer, Cold planer, Asphalt paver, Asphalt recycling machine

Roller compactor, Remixing transfer vehicle, Slip form pavers

Dump truck, Self-steering axle

Offered solutions

Automatic lubrication

The ALLFETT greasing system protects your equipment; it insures a continuous greasing to the points at regular intervals.

Shortage of grease, heavy loads, dust and water prematurely wears out your moving parts of the machine.

Example of installation on an asphalt paver

Example of installation on a road reclamer

Example of installation on a transfert vehicle

Learn more about lubrication systems:

Pedestrian detection

Blaxtair is a tool to help detect people and obstacles

for work sites and industrial sites

Installed on the front, back and / or sides of the machines, the Blaxtair makes it possible to differentiate a man from another obstacle in real time thanks to a specific stereoscopic camera designed to work in harsh environments.

Blaxtair® prevents collisions from happening and its alarm turns on only when a pedestrian is in danger. 

Why use BLAXTAIR?

Enhances the security of your worksite

Reduces your machine’s operating costs

Improves your worksite productivity

Brings evidence in case of accident

Maximize your vision and security on the work site by installing an industrial camera:

Laser Guidance

The laser guidance uses an ultra high visibility green laser to establish visual line control.

Versatile all weather product that can be used for any vehicle or equipment requiring line control.

Lubrication is a process which aims at reducing friction between two moving pieces. When two surfaces come in contact with one another, a fluid must be injected to separate them. The word « greasing » applies when grease is used to lubricate.

The main purposes of lubrication

Lubrication allows to:

•  Reduce friction (rubbing or deformation)
•  Prevent pieces from wear
•  Absorb/reduce shocks
•  Protect from corrosion
•  Isolate components from contamination
•  Clean/get rid of contaminants.

Criteria to be respected

In order to obtain an optimal reliability and maximum benefits from a lubrication program, certain criteria must be met.

Use the right grease / lubricant

Grease is the key element to your lubrication system. The choice of grease type is particularly important for the proper function of the system and will have direct impact on its efficiency.

Over 80% of equipment are lubricated with grease. Most companies use an all-purpose grease for their equipment. In certain cases this is acceptable, this application can incur waste of grease and can harm the productivity.

Most applications often require specialized grease in order to optimize their performance. Machines that are exposed to elevated temperatures or elevated pressures normally require special formulated greases in order to meet operational requirements. Specialized grease can often lengthen the intervals of lubrication and considerably reduce the consumption of grease.

Mixing certain greases could create a chemical reaction that can damage your equipment. It is therefore important to follow the makers’ recommendations

The right quantity

The right quantity of lubricant distributed to each point plays a major role. To under lubricate or to over lubricate can have a negative effect and must be avoided.

Over lubricating leads to excessive pressure on the bearings. Over lubricating increases your expenses linked to an enormous waste of grease. On average, each dollar of lubricant purchased, the shop spends three dollars of expenses on lubricant waste. A good lubrication program permits to follow and control lubrication consumption and eliminate costs.

On the other hand, a prolonged deficiency of lubricant (under lubrication) can cause extreme wear of non-lubricated surfaces, thus causing a failure to the machine along with elevated repair costs.

Automatic lubrication; The key to success

Automatic lubrication insures a continuous lubrication at a regular intervals the greasing points and the special points which have difficult access. It works while the machines engine is running along when all points are in movement.

La lubrification centralisée automatique est utilisée pour contrôler la quantité de lubrifiant distribuée sur les points où le frottement est un problème. Une lubrification régulière maintient un film de graisse et empêche la contamination de vos surfaces d’appui en scellant l’interstice autour de chacune d’elles. Ce collet garde à l’extérieur poussière, sable, eau et empêche toute impureté de créer un abrasif sur les surfaces d’appui et ainsi en éviter l’usure prématurée.

The central automatic lubrication is used to control the amount of lubricant distributed on the points where the friction is a problem. A regular lubrication maintains a film of grease which prevents contamination of your surfaces in sealing inter space around each of them. This collar keeps away the dust, sand and water to filter through and create an abrasive surface and prevents premature wear.

A good lubrication is essential for preventative maintenance of your equipment.

Many organizations, notably Hydro Québec and the CNESST require that construction equipment must be equipped with a range limiting device that blocks the system to avoid contact with electrical wires and any environmental obstacles. You thus have to conform to the « Safety code for construction ».

Attestation letter

For each new installation an engineer letter is issued certifying the quality of the operating system of the machine.

When was your last inspection?

ATTENTION! The certificate is valid for 1 year of the date of installation of the range limiting device. It is recommended to have the system inspected every year in order to obtain a new engineer certificate. The fines for this type of violation can be very costly. On top of paying for this violation, you will be obligated to have the system inspected in order to obtain a new attestation. Without a renewal you will be unable to operate on the work site.

Save your time and money! Do your inspection on the system before the beginning of the construction season!

Range limiting device; because it’s the law, but above all it is for your security!

The range limiting device is anindispensable toolfor your security while operating an excavator or backhoe below electrical wires.

Contact your representative for further information