Designed to seal punctures up to 20mm in diameter. For most applications, replaces the need for solid fill: much cheaper, lighter and does not worsen the ride.
OKO Mining Xtra heavy duty is an essential aid to operators of vehicles that suffer the very harshest off-road terrain.
The strongest tire sealant yet produced
Designed for Mines, Quarries and rough Construction & Waste Management sites
Permanently seals multiple holes up to 20mm+: conditions tires and extends tire life
For Extra Heavy-Duty requirements
Often eliminates the need for Solid Fill in tires
Up to 80 km/hr: 50 mph
25 litre drum & durable pump
Fitting tires with solid polyurethane fill is one solution but it carries a heavy weight penalty, is very expensive and adversely affects the ride, as well as placing a strain on axles. In most cases, extra heavy-duty OKO Mining can work as well as solid fill, at a fraction of the cost and with minimal weight penalty. It seals holes of more than 20mm in diameter. That is why it is the natural choice for mines, quarries, waste management plants and rough construction sites.
OKO Mining is primarily designed for use off the highway. It can be used on road for slower-moving trucks and service vehicles, and is often used in countries with bad road surfaces; it is preferred to other sealants for use inside inner tubes.
CHARACTERISTICS
Punctures are one of the most common causes of costly downtime, and OKO can eliminate most of them
Can avoid the tire damaging itself on the rim and having to be replaced
Seals the hole in the tread area the moment the puncture happens
Designed for use in the harshest off-road environments
Lasts the legal life of the tire
Deals with loss of air and provides a permanent seal to any hole in the tread area caused by puncturing objects with a diameter of 20mm+ in large tires
SPECIFICATIONS
Temperature: -40°C & -50°C
Size available: 25L & 1000L
Non Corrosive: Non Flammable: Non Hazardous.
NO ADVERSE AFFECT UPON TIRES OR RIMS (contains anti-corrosion agents that protect steel and alloy wheels).
WORKS WITH INNER TUBES and TUBELESS TIRES. For slower-moving trucks and other vehicles on road that have inner tubes, this product is recommended.
Remoulds: causes no problems, can be washed out.
Vulcanising: First remove OKO with water, then dry tire with “BUFSOL” solution.
Colour: Natural off-white. Viscous. Low Odour.
QUANTITY REQUIRED see application chart
FEATURES
The black 25 litre drum is used in combination with a durable aluminium-barrelled pump (sold separately), which delivers 200ml per downward stroke for rapid and accurate filling through the valve stem. Our specially-designed pump works against pressure, so you can inject OKO into tires containing up to 45 psi/ 3.1 BAR.
Because OKO is water-soluble, the pump washes clean for repeated use, and if the tire is removed from the rim in the future both the tire and the wheel can be hosed clean. Anti-corrosion agents prevent any damage to either.
Precise calculations depend on the tire size and type but typically OKO can be fitted to all 4 large industrial tires for much less than the cost of replacing one tire, even using a remould.
PRECAUTIONS
No risk and safety labels or warnings are required since this product is not classified as hazardous under current regulations. Normal safety precautions should be taken: wear gloves and protect eyes. Rinse product off any clothes that it may be spilled upon. Keep away from children. If swallowed, see a doctor.
FINANCING
The Alltech Group now offers Leasing for all products offered.
Our objective is to help entrepreneurs and self-employed workers to obtain custom financial services.
What is leasing?
Leasing is a very popular financing method among companies purchasing equipment commonly called assets or capital assets. The equipment is financed by equal monthly instalments for terms of 24 to 66 months, with end-of contract options meeting the need you may have to acquire the equipment at the end of the term. In addition, those installments are recognized as a tax expenditure. Leasing thus offers you several advantages.
To learn more about the solutions offered:
Don't wait until problems occur!
Contact your sales representative to know which products if offered for your industry.
The black 25 litre drum is used in combination with a durable aluminium-barrelled pump (sold separately), which delivers 200ml per downward stroke for rapid and accurate filling through the valve stem. Our specially-designed pump works against pressure, so you can inject OKO into tires containing up to 45 psi/ 3.1 BAR.