A good lubricant is essential for preventative maintenance for your equipment. Most of the foremen that are responsible for the maintenance of equipment will agree with this statement concerning preventative maintenance. If there is a lack of grease where there is movement and it collects dust or you wash the machine it will prematurely start to damage the moving parts. To know more about the advantages linked to automatic lubrication, consult the article «Preventative maintenance».

Today’s reality is that most equipment are exposed to rough conditions (demolition, excavation, etc.) where the system is dangerously exposed. Working in such conditions can implicate costly repairs due to crushed and/or torn hoses which can lead to extra time for preventative maintenance.

Customized lubrication systems for your environment.

In order to address this issue, Alltech Group has adapted their lubrication systems to such environments by installing a special shielding to prevent damaging parts and hoses in critical areas of the equipment.

Shielding is installed on equipment that operate in extreme conditions such as demolition, excavation in rocky areas, mines, quarries, forestry, etc. it prevents costly repairs due to crushed and/or torn hoses. All areas at high risk are reinforced and protected.

An example of a shielding installed on a loader.

• The hoses placed in a hazardous area are protected by a protective metal angle and maxi clamp.
• Points that are located in hazardous areas are linked with metal hose.

An example of shielding installed on a excavator.

• The distribution valve located on the H-Link is protected by a protective metal plate.
• The pump is installed in the motor or tool compartment, sheltered from debris, weather and contaminants.
• Points situated in hazardous areas are linked by ultra-resistant metal hose.
• The supply lines of the H-Link are protected by a mechanical tube.

Do not forget your automatic lubrication system must be your go too and not your burden!

ALLFETT Lubrication system

Versatile system which is personalized very easily to all applications.

The blind spots in the front and the rear of a machine

represents the most dangerous zones.

Accidents caused by blind spots represent major unforeseen expenses to your company. A camera system would dramatically reduce these expenses. A tanker truck backing up can be very dangerous and could cause bodily injuries to people who are nearby.

A camera decreases the blind spots for the operator thus reducing the risk of serious accidents.

Many operators have confirmed that when backing up a loader in a quarry or a crushing site that they are unable to see behind them even with a rear-view mirror. Mining trucks backing up in a dynamite zone can now avoid sharp rocks which damage their tires, thus saving thousands of dollars for tire replacements.

Maximize your vision and security on the work site by installing an industrial camera: 

The system offer flexibility: wherever you load, the scale is at hand!

A load scale system permits you to control the following ;

Your Data :

Permits to have precise data and exact weight. No more false estimates!

Your Costs :

If the truck is overloaded ,you have a risk of being fined and if the truck is not loaded enough you lose time and money!

Your time :

A scale increases productivity on the site by optimizing your loads . A load done properly the first time permits incredible time saved! , and reduces rotations of vehicles.

The electronic weighing system for all vehicle types

Range limiting device, because that is the regulation! 

Many organizations, notably Hydro Québec and the CNESST require that construction equipment must be equipped with a range limiting device that blocks the system to avoid contact with electrical wires and any environmental obstacles. You thus have to conform to the « Safety code for construction ». 

What is a range limiting device?

The range limiting device is a safety device and assistance for equipment operators. It is a monitoring device which supplies the operator precise indication on the positioning of the machine in respect to environmental obstacles which will protect the operator. It therefore limits the risk of the machine to come into contact with environmental obstacles (Electrical wires, walls, ceilings, etc.).

For more infomation about MEGA range limiting device: 

Because simplicity + reliability = Security 

In order to comply with the law, does not mean it needs to be a complicated task. The MEGA range limiting device is simple and easy to program. The Alltech Group recommends the 600 series for all excavation jobs.

The range limiting device MEGA 6000 is designed to program a height limit and a rotation limit (left, right). It is also possible to program multiple limits (optional) and to indicate the depth of the bucket (optional). The range limiting device series model 6000 was conceived for a use on many types of machines. It can be installed on all makes and models of equipment.

It adapts too many types of installations;

• Excavator
• Mini-excavator
• Backhoe
• Wheeled excavator
• Excavator double –boom

The range limiting device is an indispensable tool for your security while operating an excavator below electrical wires.

Yes, it’s the law, but above all it is for your security!

Contact your representative for further information